Mirror Interface - Allied Telesis x510-28GTX Command Reference Manual

P M R
ORT IRRORING AND EMOTE

MIRROR INTERFACE

mirror interface
Overview Use this command to define a mirror port and mirrored (monitored) ports and
direction of traffic to be mirrored. The port for which you enter interface mode will
be the mirror port.
The destination port is removed from all VLANs, and no longer participates in other
switching.
Use the no variant of this command to disable port mirroring by the destination
port on the specified source port.
Use the none variant of this command when using copy-to-mirror ACL and QoS
commands.
mirror interface <source-port-list> direction
Syntax
{both|receive|transmit}
mirror interface none
no mirror interface <source-port-list>
no mirror interface none
C613-50170-01 Rev B
M C
IRRORING OMMANDS
Parameter
<source-port-list> The source switch ports to mirror. A port-list can be:
direction
both
receive
transmit
none
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
• a port (e.g. port1.0.2)
• a continuous range of ports separated by a hyphen, e.g.
port1.0.1-1.0.2
• a comma-separated list of ports and port ranges, e.g.
port1.0.1,port1.0.4-1.0.6
The source port list cannot include dynamic or static
channel groups (link aggregators).
Specifies whether to mirror traffic that the source port
receives, transmits, or both.
Mirroring traffic both received and transmitted by the
source port.
Mirroring traffic received by the source port.
Mirroring traffic transmitted by the source port.
Specify this parameter for use with the ACL (Access Control
List) access-list and QoS (Quality of Service) default action
commands when used with the copy-to-mirror parameter
option, so you can specify the destination port (the
analyzer port) for the traffic without specifying a source
mirror port. See the ACL commands
hardware ACL for IP packets)
hardware ACL for MAC addresses), and the QoS command
default-action for further information.
access-list (numbered
and access-list (numbered
483