Clear Mac Address-Table Static - Allied Telesis IE220 Series Manual

S C
WITCHING OMMANDS
-
CLEAR MAC ADDRESS TABLE STATIC

clear mac address-table static

Overview Use this command to clear the filtering database of all statically configured entries
for a selected MAC address, interface, or VLAN.
clear mac address-table static [address <mac-address>|interface
Syntax
<port>|vlan <vid>]
Mode Privileged Exec
Usage notes Use this command with options to clear the filtering database of all entries made
from the CLI for a given MAC address, interface or VLAN. Use this command
without options to clear any entries made from the CLI.
Compare this usage with
Examples This example shows how to clear all filtering database entries configured through
the CLI.
awplus#
This example shows how to clear all filtering database entries for a specific
interface configured through the CLI.
awplus#
This example shows how to clear filtering database entries configured through the
CLI for the MAC address 0000.5E00.5302.
awplus#
Related clear mac address-table dynamic
commands
mac address-table static
show mac address-table
C613-50644-01 Rev B
Parameter
address
<mac-address>
interface <port>
vlan <vid>
clear mac address-table static
clear mac address-table static interface port1.0.3
clear mac address-table static address 0000.5E00.5302
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Specify a MAC (Media Access Control) address to be cleared
from the filtering database, in the format
HHHH.HHHH.HHHH.
Specify the port from which statically configured entries are
to be cleared. The port can be
• a switchport (e.g. port1.0.4)
• a static channel group (e.g. sa2)
• a dynamic (LACP) channel group (e.g. po2)
Specify a VID (VLAN ID) in the range 1 to 4094 to be cleared
from the filtering database.
clear mac address-table dynamic command.
517