Show Log Config - Allied Telesis x510-28GTX Command Reference Manual

L C
OGGING OMMANDS

SHOW LOG CONFIG

show log config
Overview This command displays information about the logging system. This includes the
configuration of the various log destinations, such as buffered, permanent, syslog
servers (hosts) and email addresses. This also displays the latest status information
for each log destination.
show log config
Syntax
Mode User Exec, Privileged Exec and Global Configuration
Example To display the logging configuration use the command:
awplus#
Output Figure 10-4: Example output from show log config
Facility: default

PKI trustpoints: example_trustpoint

Buffered log:
Status ......... enabled
Maximum size ... 100kb
Filters:
*1 Level ........ notices
Program ...... any
Facility ..... any
Message text . any
2 Level ........ informational
Program ...... auth
Facility ..... daemon
Message text . any
Statistics ..... 1327 messages received, 821 accepted by filter (2016 Oct 11 
10:36:16)
Permanent log:
Status ......... enabled
Maximum size ... 60kb
Filters:
1 Level ........ error
Program ...... any
Facility ..... any
Message text . any
*2 Level ........ warnings
Program ...... dhcp
Facility ..... any
Message text . "pool exhausted"
Statistics ..... 1327 messages received, 12 accepted by filter (2016 Oct 11 
10:36:16)
C613-50170-01 Rev B
show log config
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
454