Log Permanent Size - Allied Telesis AT-IX5-28GPX Manual

L C
OGGING OMMANDS

LOG PERMANENT SIZE

log permanent size
Overview This command configures the amount of memory that the permanent log is
permitted to use. Once this memory allocation has been filled old messages will be
deleted to make room for new messages.
Syntax
log permanent size <50-250>
Mode Global Configuration
Example To allow the permanent log to use up to 100 kB of NVS use the following
commands:
awplus#
awplus(config)#
Validation show log config
Commands
Related default log permanent
Commands
log permanent
310 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Size of the permanent log in kilobytes
<50-250>
configure terminal
log permanent size 100
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A