Default Log Console - Allied Telesis IE340 Series Command Reference Manual

L C
OGGING OMMANDS

DEFAULT LOG CONSOLE

default log console
Overview This command restores the default settings for log messages sent to the terminal
when a
console when a log console command is issued.
default log console
Syntax
Mode Global Configuration
Example To restore the log console to its default settings use the following commands:
awplus#
awplus(config)#
Related log console
commands
log console (filter)
log console exclude
show log config
C613-50631-01 Rev A
log console command is issued. By default all messages are sent to the
configure terminal
default log console
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
412