Log Buffered Size - Allied Telesis IE220 Series Manual

L C
OGGING OMMANDS

LOG BUFFERED SIZE

log buffered size
Overview This command configures the amount of memory that the buffered log is
permitted to use. Once this memory allocation has been filled old messages will be
deleted to make room for new messages.
Use the no variant of this command to return to the default.
Syntax log buffered size <50-250>
no log buffered size
Default 50 kilobytes
Mode Global Configuration
Example To allow the buffered log to use up to 100 kilobytes of RAM, use the commands:
awplus#
awplus(config)#
To return to the default value, use the commands:
awplus#
awplus(config)#
Related clear log buffered
commands
copy buffered-log
default log buffered
log buffered
log buffered (filter)
log buffered exclude
show log
show log config
C613-50644-01 Rev B
Parameter Description
<50-250>
Size of the RAM log in kilobytes
configure terminal
log buffered size 100
configure terminal
no log buffered size
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
382