Show Memory History - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

SHOW MEMORY HISTORY

show memory history
Overview This command prints a graph showing the historical memory usage.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show memory history <stack-ID>
Mode User Exec and Privileged Exec
Usage This command's output displays three graphs of the percentage memory
utilization:
•
•
•
If entered on the stack master, this command will display corresponding memory
utilization information for all the stack members. A stack member heading will be
displayed to distinguish the different lists for every stack member.
Examples To show a graph displaying the historical memory usage for either a single
unstacked device, or a complete stack, use the command:
awplus#
To show a graph displaying the historical memory usage for specific stack member
(stack member 2 in this example) within a stack, use the command:
awplus#
238 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
Guide.
Parameter
<stack-ID>
per second for the last minute, then
per minute for the last hour, then
per 30 minutes for the last 30 hours.
show memory history
show memory history 2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
"Getting Started with AlliedWare Plus" Feature Overview
Description
Stack member number, from 1 to 8.
C613-50057-01 REV A