Show Clock - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

SHOW CLOCK

show clock
Overview This command displays the system's current configured local time and date. It also
displays other clock related information such as timezone and summertime
configuration.
Syntax
show clock
Mode User Exec and Privileged Exec
Example To display the system's current local time, use the command:
awplus#
Output Figure 5-1:
Table 5-1: Parameters in the output of the show clock command
220 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
show clock
Example output from the show clock command for a device using
New Zealand time
Local Time: Mon, 6 Aug 2007 13:56:06 +1200
UTC Time: Mon, 6 Aug 2007 01:56:06 +0000
Timezone: NZST
Timezone Offset: +12:00
Summer time zone: NZDT
Summer time starts: Last Sunday in September at 02:00:00
Summer time ends: First Sunday in April at 02:00:00
Summer time offset: 60 mins
Summer time recurring: Yes
Parameter
Local Time
UTC Time
Timezone
Timezone Offset
Summer time zone
Summer time starts
Summer time ends
Summer time offset
Summer time
recurring
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Current local time.
Current UTC time.
The current configured timezone name.
Number of hours offset to UTC.
The current configured summertime zone name.
Date and time set as the start of summer time.
Date and time set as the end of summer time.
Number of minutes that summer time is offset from the
system's timezone.
Whether the device will apply the summer time settings
every year or only once.
C613-50057-01 REV A