Move Debug - Allied Telesis IE340 Series Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT

MOVE DEBUG

move debug
Overview This command moves a specified debug file to a destination debug file.
move debug {<destination-name>|debug|nvs|flash|usb}
Syntax
Mode Privileged Exec
Example To move debug output into Flash memory with a filename "my-debug", use the
following command:
To move debug output onto a USB storage device with a filename "my-debug", use
the following command:
awplus#
Output Figure 3-5:
Related copy debug
commands
delete debug
C613-50631-01 Rev A
C
OMMANDS
Parameter
<destination-name>
move debug usb:my-debug
CLI prompt after entering the move debug command
Enter source file name []:
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The filename and path where you would like the debug
output moved to. See Introduction
syntax.
on page 137 for valid
174