Establishing A Remote Connection To The Web Browser Interface; Figure 1. Entering A Switch's Ip Address In The Url Field; Figure 2. Entering A Switch's Ip Address In The Url Field - Allied Telesis AT-FS750/20 User Manual

Chapter 1: Starting a Web Browser Session

Establishing a Remote Connection to the Web Browser Interface

22
The switch is shipped with a pre-assigned IP address of 192.168.1.1. After
your initial login, Allied Telesis suggests that you assign a new IP address
to your switch.
To manually assign an IP address to the switch, refer to "Configuration of
IPv4 Address, Subnet Mask and Gateway Address" on page 30. To
configure the switch to obtain its IP configuration from a DHCP server,
refer to "DHCP Client Configuration" on page 56.
Whether you use the pre-assigned IP address or assign a new one, you
must set your local PC to the same subnet as the switch.
To start a web browser management session, perform the following
procedure:
1. Start your web browser.
2. In the URL field of the browser, enter 192.168.1.1. See Figure 1.
Switch's IP Address

Figure 1. Entering a Switch's IP Address in the URL Field

3. The Management Software displays the login dialog box as shown in
Figure 2.

Figure 2. Entering a Switch's IP Address in the URL Field

4. Enter the default login user name and password:

Default user name: manager

Default password: friend
The login name and password are case-sensitive.