Erase Secrets - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

erase secrets

Syntax
Release Information
Description
Options
Mode
574
erase secrets seconds
Command introduced before JunosE Release 7.1.0.
Removes all CLI passwords or secrets. Execute before pressing the NMI button on the
SRP module. There is no no version.
NOTE: If you enter the service unattended password-recovery command,
the behavior of the erase secrets command changes. The erase secrets
command will not take any parameters and will not be available through a
vty session until you enter no service unattended password-recovery.
seconds—Number of seconds in the range 1–60 to allow for the operation
User Exec
Copyright © 2010, Juniper Networks, Inc.