Table of Contents
Advertisement
Media Flow Manager Administrator's Guide
•
interface-down
•
cpu-util-ave-high
•
cpu-util-ave-ok
* Can be added to info events class (see below) with email notify event <event_name>.
email class
Email class options are as follows:
•
failure events:
•
process-crash
•
unexpected-shutdown
•
info events:
•
liveness-failure
•
process-exit
•
cpu-util-ok
•
cpu-util-high
•
disk-space-ok
•
disk-space-low
show email
Email notification settings. This does not include SNMP traps, which are under the snmp-
server command tree.
enable
Enter Enable mode.
enable
From enable enter configure terminal to go to Configuration mode. Use disable to go from
Enable mode back to Standard mode.
exit
Leave configuration mode or log out of the system.
exit
Exit the current mode. From configuration mode, go to enable mode. From enable or
standard mode, log out. Use disable to go from enable mode to standard mode.
—An interface's link state has changed to DOWN.*
—Average CPU utilization has risen too high.
—Average CPU utilization has fallen back to normal levels.
—A process in the system has crashed.
—Unexpected system shutdown.
—A process in the system was detected as hung.
—A process in the system unexpectedly exited.
—CPU utilization has fallen back to normal levels.
—CPU utilization has risen too high.
—File system free space is back in the normal range.
—File system free space has fallen too low.
CHAPTER 5 CLI Commands
enable
119
Advertisement
Table of Contents
