Aaa Service Accounting Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

aaa service accounting interval

aaa service accounting interval period
Syntax
no aaa service accounting interval
Command introduced in JUNOSe Release 9.0.0.
Release Information
Specifies the default accounting interval used for services on the virtual router the
Description
Service Manager application uses this setting for RADIUS-initiated services when no
value is specified in the Service-Interim-Acct-Interval VSA (Juniper VSA 26-140). The
no version restores the default setting of 0, which turns off interim accounting for
services associated with users attached to this virtual router.
NOTE: This command and the aaa user accounting interval command replace the
deprecated aaa accounting interval command, which may be removed completely
in a future release.
Options
Global Configuration
Mode
58
aaa service accounting interval
period Accounting interval in minutes in the range 10–1440, which sets the
time period between accounting updates for services associated with users on
this virtual router; 0 is the default