aaa authentication enable default
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
aaa authentication enable default authenticator [ authenticator ]*
no aaa authentication enable default
Command introduced before JunosE Release 7.1.0.
Allows privilege determination to be authenticated through the authenticator(s) you
specify. This authentication is applied to vty users. The no version removes the
authentication settings.
authenticator—Authentication method:
enable—Use the enable password
line—Use the line password
none—Use no authentication
radius—Use RADIUS authentication
tacacs+—Use TACACS+ authentication
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Global Configuration
Chapter 2: A Commands
33