Ipv6 Ospf Network - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 ospf network

Syntax
Release Information
Description
Options
Mode
1080
ipv6 ospf [ processId ] network { broadcast | point-to-point }
no ipv6 ospf [ processId ] network
Command introduced before JunosE Release 7.1.0.
Specifies a network type (broadcast or point-to-point) for an interface. The no version
resets the path cost to the default.
processId—Integer in the range 1–65535
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.