H3C MSR 20-20 Command Reference Manual page 256

256 C 16: F
HAPTER UNDAMENTAL
Parameter
Description
Example
CE3 I C
NTERFACE ONFIGURATION
interface-number: CE3 interface number. In conjunction with the e3 keyword, it
specifies a CE3 interface.
Use the display controller e3
specified or all CE3 interfaces.
In addition to the state information of the CE3 interface, the command displays
information about each E1 line on the CE3 interface if the interface is working in
CE3 mode.
# Display information about interface E3 2/0.
<Sysname> display controller e3 2/0
E3 2/0 is up
Description : E3 2/0 Interface
Applique type is CE3 - 75 OHM unbalanced
code HDB3, clock slave, national-bit 1,loopback not set
Alarm: none
ERROR: 0 BPV, 0 EXZ, 0 FrmErr, 0 FEBE
E3-0 CE1 1 is up
Frame-format NO-CRC4, clock master, loopback not set
E3-0 CE1 2 is up
Frame-format NO-CRC4, clock slave, loopback local
E3-0 CE1 3 is up
Frame-format NO-CRC4, clock slave, loopback remote
E3-0 CE1 4 is up
Frame-format CRC4, clock slave, loopback not set
E3-0 CE1 5 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 6 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 7 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 8 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 9 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 10 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 11 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 12 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 13 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 14 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 15 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 16 is up
Frame-format NO-CRC4, clock slave, loopback not set
C
OMMANDS
command to display state information about one
Frame-format G751, line