Display Controller E3 - H3C MSR 20-20 Command Reference Manual

crc
Syntax
View
Parameter
Description
Related command:
Example

display controller e3

Syntax
View
<Sysname> system-view
[Sysname] controller e3 2/0
[Sysname-E3 2/0]
crc { 16 | 32 | none }
undo crc
Synchronous serial interface view
16: Adopts 16-bit CRC.
32: Adopts 32-bit CRC.
none: Adopts no CRC.
Use the command to configure CRC mode for a synchronous serial interface
crc
formed by CE3 interfaces.
Use the undo crc command to restore the default, that is, 16-bit CRC.
e1 channel-set, e1 unframed, using (CT3 interface view).
# Apply 32-bit CRC to a serial interface formed on interface E3 2/0 in
unchannelized mode.
<Sysname> system-view
[Sysname] controller e3 2/0
[Sysname-E3 2/0] using e3
[Sysname-E3 2/0] quit
[Sysname] interface serial 2/0/0:0
[Sysname-Serial2/0/0:0] crc 32
# Apply 16-bit CRC to a serial interface formed on interface E3 2/0 in
unchannelized mode.
<Sysname> system-view
[Sysname] controller e3 2/0
[Sysname-E3 2/0] t1 3 channel-set 5 timeslot-list 1-20
[Sysname-E3 2/0] quit
[Sysname] interface serial 2/0/3:5
[Sysname-Serial2/0/3:5] crc 16
display controller e3 [ interface-number ]
Any view
255