H3C MSR 20-20 Command Reference Manual page 241

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

Table 20 Description on the fields of the display ft1 serial command
Field
Cable type
Frame-format
fdl
Line code
Source Clock
Data-coding
Idle code
Itf type
Itf number
Loop back
Alarm State
Receiver alarm state
Transmitter is sending remote alarm.
Pulse density violation detected
SendLoopCode History:
inband-llb-up:0 times,
inband-llb-down:0 times.
fdl-ansi-llb-up:0 times,
fdl-ansi-llb-down:0 times.
fdl-ansi-plb-up:0 times,
fdl-ansi-plb-down:0 times
BERT state:(stopped, not completed)
Test pattern: 2^15, Status: Not Sync,
Sync Detected: 0
Time: 0 minute(s), Time past: 0 minute(s) The duration of the BERT test and the time that has
Bit Errors (since test started)
Bits Received (since test started)
Bit Errors (since latest sync)
Bits Received (since latest sync)
Historical Statistics:
Last clearing of counters: Never
Description
Cable type of the interface, 100 ohm balanced in
this sample output
Frame format configured on the interface: ESF or
SF
FDL format: ANSI, ATT, or none
AMI or B8ZS
Source clock used by the interface: master for the
internal clock or slave for the line clock
Normal or inverted
7e or ff
Type of interframe filling tag: 7e or ff
Number of interframe filling tags
Loopback setting on the interface: local, payload,
remote, or not set
Alarm state
Type of received alarm: none, LOS, LOF, RAI, or AIS
Type of transmitted alarm: RAI, or none
The detected pulse density is incompliant with the
specification
History of loopback code sending to the far-end,
including the number of transmissions for each
type of code, and the type of the last sent code.
(See "ft1 sendloopcode" on page 251.)
BERT state: completed, stopped (administratively
stopped), or running.
Test pattern in use, 2^15 in this sample output;
synchronization state, and the number of detected
synchronizations
elapsed
Number of bit errors received since the start of the
BERT test
Number of bits received since the start of the BERT
test
Number of bit errors received since the last
synchronization
Number of bits received since last synchronization
Historical statistics
Counter clearing records
241

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents