226
C
13: F
HAPTER
UNDAMENTAL
Example
itf (CT1/PRI interface view)
Syntax
View
Parameter
Description
Example
loopback (CT1/PRI interface view)
Syntax
CT1/PRI I
C
NTERFACE
ONFIGURATION
The line idle code is sent in the timeslots that are not bundled into the logical
channels on the interface.
# Set the line idle code to 0x7E on CT1/PRI interface T1 2/0.
<Sysname> system-view
[Sysname] controller t1 2/0
[Sysname-T1 2/0] idlecode 7e
itf { number number | type { 7e | ff } }
undo itf { number | type }
CT1/PRI interface view
number number: Sets the number of interframe filling tags (an interframe filling
tag is one byte in length). The number argument ranges from 0 to 14.
type { 7e | ff }: Sets the interframe filling tag to 0x7E by specifying the 7e keyword
or to 0xFF by specifying the ff keyword. On CT1/PRI interfaces, the default
interframe filling tag is 0x7E.
Use the
itf
command to set the type and the number of interframe filling tags on
the CT1/PRI interface. Two types of interframe filling tag are available: 0x7E and
0xFF.
Use the
command to restore the default.
undo itf
By default, the interframe filling tag is 0x7E, the number of interframe filling tags
is 4.
Interframe filling tags are sent when no service data is sent on the timeslots
bundled into logical channels on a CT1/PRI interface.
# Set the interframe filling tag to 0xFF on CT1/PRI interface T1 2/0.
<Sysname> system-view
[Sysname] controller t1 2/0
[Sysname-T1 2/0] itf type ff
# Set the number of interframe filling tags to five on CT1/PRI interface T1 2/0.
<Sysname> system-view
[Sysname] controller t1 2/0
[Sysname-T1 2/0] itf number 5
loopback { local | payload | remote }
C
OMMANDS