Example
error-diffusion restraint enable
Syntax
View
Parameter
Description
Example
error-diffusion restraint restart-channel
Syntax
View
Parameter
Description
n
The support for these two commands varies with device models.
■
These two commands apply to CT1/PRI interfaces and CE1/PRI interfaces only.
■
# Set the error packet detect timer to 100 seconds, the renew timer to 2400
seconds, and the error packet ratio threshold to 15.
<Sysname> system-view
[Sysname] error-diffusion restraint config 100 2400 15
error-diffusion restraint enable
undo error-diffusion restraint enable
System view
None
Use the
error-diffusion restraint enable
diffusion restraint.
Use the
undo error-diffusion restraint enable
function.
By default, error packets diffusion restraint is enabled.
n
The support of these two commands varies with device model.
■
These two commands apply to CT1/PRI interfaces and CE1/PRI interfaces only.
■
# Enable error packets diffusion restraint.
<Sysname> system-view
[Sysname] error-diffusion restraint enable
error-diffusion restraint restart-channel serial interface-number:set-number
System view
serial interface-number:set-number: Number of channel formed by bundling
CE1/PRI interfaces, where interface-number is the number of the CE1/PRI
interface, set-number is the number of the channel set.
Use the
error-diffusion restraint restart-channel
channel that has been shut down for the sake of error packets diffusion restraint.
command to enable error packets
command to disable this
command to restart the
207