Error-Diffusion Restraint Restart-Channel - H3C MSR 20-20 Command Reference Manual

224 C 13: F
HAPTER UNDAMENTAL

error-diffusion restraint restart-channel

Syntax
View
Parameter
Description
Example
fdl
Syntax
View
Parameter
Description
Example
CT1/PRI I
NTERFACE
error-diffusion restraint restart-channel serial interface-number:set-number
System view
serial interface-number:set-number: Specifies a channel formed on a CE1/PRI
interface. The interface-number argument is a CE1/PRI interface number, and the
set-number argument is a channel set number.
Use the error-diffusion restraint restart-channel
channel previously shut down by the error packet diffusion restraint function.
n
The support of this command varies with device model.
■
This command applies to CT1/PRI interfaces and CE1/PRI interfaces only.
■
# Bring up channel Serial 2/0:0 (assuming that the channel is shut down by the
error packet diffusion restraint function).
<Sysname> system-view
[Sysname] error-diffusion restraint restart-channel serial 2/0:0
fdl { ansi | att | none }
undo fdl
CT1/PRI interface view
ansi: Implements ANSI T1.403 FDL.
att: Implements AT&T TR 54016 FDL.
none: Disables facilities data link (FDL).
Use the command to set the behavior of the CT1/PRI interface on the FDL in
fdl
ESF framing.
Use the
undo fdl
By default, FDL is disabled (none).
FDL is an embedded 4 kbps overhead channel within the ESF format for
transmitting performance statistics or loopback code.
# Implement AT&T TR 54016 FDL on interface T1 2/0.
C C
ONFIGURATION OMMANDS
command to restore the default.
command to bring up a