Arp Timer Aging; Display Arp - H3C s3600 series Command Manual

Examples
# Create a static ARP mapping entry, with the IP address of 202.38.10.2, the MAC address of
000f-e20f-0000. The ARP mapping entry belongs to Ethernet 1/0/1 which belongs to VLAN 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] arp static 202.38.10.2 000f-e20f-0000 1 Ethernet 1/0/1

arp timer aging

Syntax
arp timer aging aging-time
undo arp timer aging
View
System view
Parameters
aging-time: Aging time (in minutes) of the dynamic ARP entries. This argument ranges from 1 to 1,440.
Description
Use the arp timer aging command to configure the aging time for dynamic ARP entries.
Use the undo arp timer aging command to restore the default.
By default, the aging time for dynamic ARP entries is 20 minutes.
Related commands: display arp timer aging.
Examples
# Configure the aging time to be 10 minutes for dynamic ARP entries.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] arp timer aging 10

display arp

Syntax
display arp [ dynamic | static | ip-address ]
View
Any view
Parameters
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
ip-address: IP address. ARP entries containing the IP address are to be displayed.
1-8