Display Cfd Service-Instance - H3C S3100 Series Command Manual

Field
State
Time
MAC Status

display cfd service-instance

Syntax
display cfd service-instance [ instance-id ]
View
Any view
Default Level
2: System level
Parameters
instance-id: Service instance ID, ranging from 1 to 32767.
Description
Use the display cfd service-instance command to display the configuration information of service
instance.
Without specifying the service instance ID, the command will display the configuration information of all
service instances.
Examples
# Display the configuration information of all service instances.
<Sysname> display cfd service-instance
2 service instance(s) configured:
Service instance 5:
Maintenance domain: mdtest_5
Maintenance association: matest_5
Level: 5
Service instance 6:
Maintenance domain: mdtest_6
Maintenance association: matest_6
Level: 6
<Sysname> display cfd service-instance 7
Service instance 7:
Maintenance domain: mdtest_7
Maintenance association: matest_7
Level: 7
MEP ID: 731
Running state of MEP, which can be OK or FAILED
Recent time of the remote MEP when it is FAILED or OK.
State of the port indicated by the last CCM received from the remote MEP,
which can be UP or DOWN
VLAN: 5 MIP rule: None
VLAN: 6 MIP rule: None
VLAN: 7 MIP rule: None
Interface: Ethernet1/0/1
Description
CCM interval: 1s
CCM interval: 1s
CCM interval: 1s
Direction: Inbound
1-24