Shared-Shaping-Constituent - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

shared-shaping-constituent

shared-shaping-constituent [ priority [ priorityValue ] | weight [ weightValue ] ]
Syntax
no shared-shaping-constituent
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the attributes of implicit and explicit shared-shaping constituents and specifies
Description
explicit shared-shaping constituents. Constituents default to priority with a priority
value of 8. Priority constituents are ordered before weighted constituents. The no
version deletes the attributes or explicit constituent.
Options
Scheduler Profile Configuration
Mode
Related Topics
512
shared-shaping-constituent
priorityValue Value, in the range 1–8, that specifies the order in which the
constituent can claim bandwidth from among all priority constituents; a lower
value correlates to a higher claim; 8 is the default value
weightValue Value, in the range 1–31, that specifies the order in which the
constituent can claim bandwidth from among all weighted constituents; a lower
value correlates to a higher claim; 8 is the default value
Configuring Implicit Constituents for Simple or Compound Shared Shaping
Configuring Explicit Constituents for Simple or Compound Shared Shaping