Set Dhcp Vendor-Option - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

set dhcp vendor-option

To set the default action to take when the option 60 string does not match a
Syntax
configured vendor-option string:
[ no ] set dhcp vendor-option default [ drop | local-server | proxy-client |
relay address | relay-server-list ]
To set the action to take when the option 60 string matches a configured
vendor-option string:
[ no ] set dhcp vendor-option { equals | starts-with } string [ local-server | relay
address ]
Command introduced in JUNOSe Release 8.2.0.
Release Information
Configures vendor-option strings that control DHCP client traffic. Creates DHCP
Description
vendor-option servers by configuring DHCP relay to match DHCP option 60 strings
and to specify the action the router takes when it receives DHCP option 60 strings.
The no version disables the setting.
Options
Global Configuration
Mode
drop Discards packets
local-server Forwards packets to the DHCP local server
proxy-client Forwards packets to the DHCP proxy client server
address IP address of the vendor-option server to which packets are forwarded
relay-server-list Forwards packets to all non-vendor option DHCP servers. The
relay-server-list consists of all non-vendor option servers. Non-vendor option
servers are those servers that are configured with the set dhcp relay command
but not with the set dhcp vendor-option command.
equals Configures a string that must be matched exactly for option 60 processing
starts-with Configures the string that is matched from left-to-right for option
60 processing
string Option 60 string to match; up to 254 hexadecimal characters
Chapter 7: S Commands
set dhcp vendor-option
487