Set Dhcp Relay Assign-Giaddr-Source-Ip - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

Chapter 7: S Commands

set dhcp relay assign-giaddr-source-ip

[ no ] set dhcp relay assign-giaddr-source-ip
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Configures DHCP relay and DHCP relay proxy to assign the gateway IP address
Description
(giaddr) to the source IP address of traffic they send to DHCP servers. The no version
restores the default, in which the DHCP relay and DHCP relay proxy do not assign
the giaddr to the source IP address.
Global Configuration
Mode
477
set dhcp relay assign-giaddr-source-ip