Table of Contents
Advertisement
Command Reference Guide
PPP Interface Command Set
ipv6 nd advertisement-interval
Use the ipv6 nd advertisement-interval command to specify that the Advertisement Interval Option is
sent in Internet Protocol version 6 (IPv6) router advertisement (RA) messages from the router. This
command is effectual only when the interface is in router mode. Use the no form of this command to return
to the default interval.
Syntax Description
No subcommands.
Default Values
By default, Advertisement Interval Options are not sent in RA messages.
Command History
Release 18.1
Command was introduced.
Functional Notes
Sending the Advertisement Interval Option should be enabled when the router is functioning in a mobile IP
environment to aid movement detection by mobile nodes. This option contains the current value of the
maximum router advertisement interval configured using the command
ipv6 nd ra interval on page
2554.
Usage Examples
The following example specifies that the interface include Advertisement Interval Options in RA messages
sent from the router:
(config)#interface ppp 1
(config-ppp 1)#ipv6 nd advertisement-interval
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2545
Advertisement
Table of Contents
