ADTRAN AOS Version R10.1.0 Command Reference Manual page 2522

Command Reference Guide
ip pim-sparse nbr-timeout <value>
Use the ip pim-sparse nbr-timeout command to specify protocol-independent multicast (PIM) sparse
neighbor timeout. This is the time interval after which a PIM-capable router will consider a neighbor not
present. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the nbr-timeout is set to 105 seconds.
Command History
Release 11.1
Usage Examples
The following example sets the nbr-timeout to 300 seconds:
(config)#interface ppp 1
(config-ppp 1)#ip pim-sparse nbr-timeout 300
60000CRG0-35E
Specifies the time interval in seconds after which a neighbor is considered
not present. Valid range is 30 to 10800 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PPP Interface Command Set
2522