Show Ethernet-Service Uni-Profile - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

VLAN Stacking Commands

show ethernet-service uni-profile

Displays the profile attribute configuration for VLAN Stacking User Network Interface (UNI) profiles.
show ethernet-service uni-profile [uni-profile-name]
Syntax Definitions
uni-profile-name
Defaults
By default, all UNI profiles are displayed if a UNI profile name is not specified with this command.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Specify a UNI profile name to display attributes for a single UNI profile.
Examples
-> show ethernet-service uni-profile
Profile Name: default-uni-profile
Tunnel MAC : 01:00:0c:cd:cd:d0,
STP : tunnel,
GVRP: tunnel,
UDLD: drop,
DTP : drop,
MVRP: tunnel
output definitions
Profile Name
Tunnel MAC
PROTOCOL: mode
Release History
Release 6.3.1; command was introduced.
Release 6.4.3; Tunnel MAC field and mac-tunnel mode were added.
OmniSwitch CLI Reference Guide
Alphanumeric string of up to 32 characters. Use quotes around string if
the profile name contains multiple words with spaces between them
(e.g., "Alcatel-Lucent Engineering").
802.1x : drop,
AMAP : drop,
PAGP : drop,
PVST : drop,
The name of the UNI profile.
The MAC address to be used for mac tunneling.
The protocol and configured mode:
peer - The UNI port is participating in the specified protocol.
drop - Discards the specified PDU
tunnel - The PDU is being tunneled across the provider network with-
out modifying the MAC address.
mac-tunnel - The PDU is being tunneled across the provider network
after changing the destination MAC address.
June 2012
802.3ad : peer,
OAM : peer,
CDP : drop,
VLAN : drop,
802.1ab : drop,
LACPMARKER : peer,
VTP : drop,
UPLINK : drop,
page 44-45