Show End-User Profile - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show end-user profile

Displays basic information about end-user profiles or a particular end-user profile.
show end-user profile name
Syntax Definitions
name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
•
The show end-user profile command displays information about profiles configured on the switch.
For information about users, use the
•
If a particular profile is not specified, information about all profiles is displayed.
Examples
-> show end-user profile Prof1
End user profile : Prof1
Area accessible with read and write rights :
physical,
vlan table,
basic ip routing,
ip routes table,
mac filtering table,
spantree
Slot : 1, ports allowed : 1-2, 4-5, 7-8, 10-11, 13-14, 16-17, 19-20, 22-24
Slot : 2, ports allowed : 1-2, 4-5, 7-8, 10-11, 13-14, 16-17, 19-20, 22-24
Slot : 3, ports allowed : 1-2, 4-5, 7-8, 10-11, 13-14, 16-17, 19-20, 22-24
Slot : 4, ports allowed : 1-2, 4-5, 7-8, 10-11, 13-14, 16-17, 19-20, 22-24
Vlan Id :
1-18, 23,
Release History
Release 6.1; command was introduced.
page 36-138
The name of the end-user profile (up to 32 alphanumeric characters).
show user
27-1001, 4073-4092
command.
OmniSwitch CLI Reference Guide
AAA Commands
June 2012