Show Policy Service - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

show policy service

Displays information about pending and applied policy services.
show [applied] policy service [service_name]
Syntax Definitions
applied
service_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information about all policy services is displayed unless service_name is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy service.
- Indicates the policy service is pending deletion.
# Indicates that the policy service differs between
the pending/applied services.
Examples
-> show policy service
Service Name
telnet_service
+ftp_service
test_service
-> show policy service telnet_service
Service Name
telnet_service
-> show applied policy service
Service Name
telnet_service
test_service
OmniSwitch CLI Reference Guide
Indicates that only services that have been applied should be displayed.
The name of the service for which you want to display information; or a
wildcard sequence of characters for displaying information about
services with similar names. Use an asterisk (*) to indicate a wildcard
character.
From
cli
cli
cli
From
cli
From
cli
cli
June 2012
IPProto ScrPort
6 (TCP)
6 (TCP)
6 (TCP)
IPProto ScrPort
6 (TCP)
IPProto ScrPort
6 (TCP)
6 (TCP)
DstPort
23
21
21
DstPort
23
DstPort
23
21
page 33-205