Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3292

Supported Levels Numeric Equivalents Description
alarm
error
alert
warning
info
debug1
debug2
debug3
Defaults
Default severity level is info. The numeric equivalent for info is 6.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
You may enter multiple application IDs in the command line. Separate each application ID with a
space and no comma.
•
Application IDs may be entered in any order.
•
This command can also be used on the secondary CMM.
Examples
-> swlog appid 254 level alarm
-> swlog appid policy level info
-> swlog appid policy snmp web aaa vlan level alert
-> no swlog appid debug2
Release History
Release 6.1; command was introduced.
page 51-6
2
3
4
5
6
7
8
9
Highest severity. The system is about to crash and reboot.
System functionality is reduced.
A violation has occurred.
A unexpected, non-critical event has occurred.
Any other non-debug message (default).
A normal event debug message.
A debug-specific message.
Lowest severity. A maximum verbosity debug message.
OmniSwitch CLI Reference Guide
Switch Logging Commands
June 2012