802.1X Commands
show 802.1x
Displays information about ports configured for 802.1X.
show 802.1x [slot/port]
Syntax Definitions
slot
port
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
If you do not specify a particular slot/port, information for all 802.1X ports is displayed.
Examples
-> show 802.1x 1/13
802.1x configuration for slot 1 port 13:
direction
operational directions
port-control
quiet-period (seconds)
tx-period (seconds)
supp-timeout (seconds)
server-timeout (seconds)
max-req
re-authperiod (seconds)
reauthentication
Supplicant polling retry count
Captive Portal Session Limit (hrs)
Captive Portal Login Retry Count
Supplicant Bypass
Supplicant Bypass allow-eap Branch
Captive Portal Inactivity Logout
OmniSwitch CLI Reference Guide
The slot of the port for which you want to display information.
The port for which you want to display 802.1X information.
= both,
= both,
= auto,
= 60,
= 30,
= 30,
= 30,
= 2,
= 3600,
= no
= 2
= 12
= 3
= enable
= pass,
= disable
June 2012
page 35-45