Show Hardware Info - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show hardware info

Displays the current system hardware information. Includes CPU, flash, RAM, NVRAM battery, jumper
positions, BootROM, and miniboot and FPGA information.
show hardware info
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E.
Usage Guidelines
This command may be used when logged into the switch that performs either as the primary or secondary
CMM role in a stack.
Examples
-> show hardware info
CPU Type
Flash Manufacturer
Flash size
RAM Manufacturer
RAM size
NVRAM Battery OK ?
BootROM Version
Backup Miniboot Version
Default Miniboot Version
Product ID Register
Hardware Revision Register
CPLD Revision Register
XFP Module ID
output definitions
CPU Type
Flash Manufacturer
Flash size
RAM Manufacturer
RAM size
page 54-32
Chassis Management and Monitoring Commands
: PowerPC 8245,
: TOSHIBA,
: 67108864 bytes (64 MB),
: (null),
: 268435456 bytes (256 MB),
: YES,
: 6.1.2.20.R02 ,
: 6.1.2.20.R02,
: 6.1.2.20.R02,
: 54
: 00
: 06
: 02
The manufacturer and model number of the CPU used on the CMM.
The manufacturer of the flash memory used on the CMM.
The total amount of flash memory (i.e., file space) on the CMM. This
field specifies the total flash memory size only and does not indicate
the amount of memory free or memory used.
The manufacturer of the RAM memory used on the CMM.
The total amount of RAM memory on the CMM. This field specifies
the total RAM memory only and does not indicate the amount of mem-
ory free or memory used.
OmniSwitch CLI Reference Guide June 2012