Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3367

Chassis Management and Monitoring Commands
•
You must enable DST whether you use a default DST timezone or if you specify your offset using the
daylight savings time start syntax.
•
Setting the start and end date and time for DST is only supported when a custom timezone is
configured.
Examples
-> system daylight savings time enable
-> system daylight savings time disable
-> system daylight savings time start first Sunday in May at 23:00 end last Sunday
in November at 10:00
-> system daylight savings time start first Sunday in May at 23:00 end last Sunday
in November at 10:00 by 45
Release History
Release 6.1; command was introduced.
Related Commands
system time
system timezone
system date
MIB Objects
systemServices
systemServicesTimezone
systemServicesEnableDST
OmniSwitch CLI Reference Guide
Displays or modifies the switch's current system time.
Displays or modifies the timezone for the switch.
Displays or modifies the switch's current system date.
June 2012 page 54-13