Chapter 47 Service Assurance Agent Commands - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

•
Although the OmniSwitch implementation of Ethernet frame delay measurement (ETH-DM) is compli-
ant with ITU-T Y.1731, delay measurement can be performed for both ITU-T Y.1731 and IEEE
802.1ag MEPs.
•
This command initiates an on-demand OAM performance measurement. To set up continuous two-way
delay measurement, see the "Service Assurance Agent Commands" chapter for information about how
to configure a SAA for continuous two-way frame delay measurement.
Examples
-> ethoam two-way-delay target-endpoint 10 source-endpoint 12 domain MD associa-
tion MA vlan-priority 4
Reply from 00:0E:B1:6B:43:89 delay=2584us jitter=282us
-> ethoam two-way-delay target-macaddress 00:e0:b1:6a:52:4c source-endpoint 12
domain MD association MA vlan-priority 4
Reply form 00:E0:B1:6A:52:4C: delay=2584us jitter=282us
Release History
Release 6.4.3; command was introduced
Related Commands
show ethoam two-way-delay
MIB Objects
dot1agCfmMdTable
dot1agCfmMdName
dot1agCfmMaNetTable
dot1agCfmMaNetName
dot1agCfmMepTable
dot1agCfmMepIdentifier
alaCfmMepTable
alaCfmMepTWDTMacAddress
alaCfmMepTWDTMepIdentifier
alaCfmMepTWDTPriority
page 45-48
Displays the two-way-delay delay and jitter parameters for all
entries or for the MAC address of a specific MEP.
Ethernet OAM Commands
OmniSwitch CLI Reference Guide June 2012