Ethoam Association - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

ethoam association

Creates Maintenance Association (MA) entry.
ethoam association ma_name format {vpnid | unsignedint | string | primaryvid | icc-based} domain
md_name primary-vlan vlan-id
no ethoam association ma_name domain md_name
Syntax Definitions
ma_name
vpnid
unsignedint
string
primaryvid
icc-based
md_name
vlan-id
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Maximum association name is name 44 minus the length of its domain name.
•
Use format as 'icc-based' to inter-op with ITU-T Y.1731.
•
Domain must be created before the creation of MA.
•
VLAN must be created before the creation of MA.
•
VLAN specified must be a primary VID.
•
VLAN ID specified must be between 1 and 4094.
•
Deletion of MA shall result in the deletion of MIPs and MEPs (on primary and non-primary VLAN)
configured in it.
Examples
-> ethoam association MA format string domain MD primary-vlan 100
OmniSwitch CLI Reference Guide
Association name for the created Ethernet OAM Association.
As specified in RFC 2685 VPN ID.
2-octet unsigned integer.
Character String.
Primary VLAN ID (12 bits represented in a 2-octet integer).
This format is supported for inter-op with ITU-T.
Specifies the domain name used while creating the management domain
for which this management association is created.
Primary VLAN Identifier.
June 2012 page 45-9