Configure Service Customer Description - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Virtual Private LAN Service (VPLS) Commands

configure service customer description

Configures an optional description for the specified customer account. Use this command to add more
information about the customer or additional account details.
configure service customer customer-id description desc-info
configure service customer customer-id no description
Syntax Definitions
customer-id
desc-info
Defaults
By default, a description is not added when a customer account is created.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the no form of this command to remove the description from the specified customer account ID.
•
Printable, 7-bit ASCII characters are also allowed in the description text string.
Examples
-> configure service customer 10 description "PT-Cal_Service_Manager"
-> configure service customer 10 no description
Release History
Release 6.4.2; command was introduced.
OmniSwitch CLI Reference Guide
An existing customer ID number.
An ASCII text string up to 80 characters in length. Enclose special char-
acters, such as #, $, or spaces, in double quotation marks (for example
"Services Contract #4000").
June 2012 page 50-9