Show Efm-Oam Configuration - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show efm-oam configuration

Displays the global LINK OAM configuration.
show efm-oam configuration
Syntax Definitions
N/A
Defaults
N/A.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855.
Usage Guidelines
•
Use this command to display the global configuration of LINK OAM.
Examples
-> show efm-oam configuration
EFM OAM Status
Multiple PDU Count
Output fields are described here:
output definitions
EFM OAM status
Multiple PDU Count
Release History
Release 6.4.2; command was introduced.
Related Commands
efm-oam
show efm-oam port detail
MIB Objects
alaDot3OamStatus
alaDot3OamMultiplePduCount
page 46-26
: enabled,
: 5
The current administrative status of LINK OAM on this switch
(Enabled or Disabled).
The number of PDUs sent when LINK OAM needs to send multiple
Event Notification.
Enables or disables the LINK OAM protocol on the switch.
Displays the LINK OAM configuration and other related parame-
ters for a port.
LINK OAM Commands
OmniSwitch CLI Reference Guide June 2012