Show Policy Network Group - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

show policy network group

Displays information about pending and applied policy network groups.
show [applied] policy network group [network_group]
Syntax Definitions
applied
network_group
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all policy network groups displays unless network_group is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy network group.
- Indicates the policy network group is pending
deletion.
# Indicates that the policy network group differs
between the pending/applied network groups.
Examples
-> show policy network group
Group Name:
Switch
+netgroup1
OmniSwitch CLI Reference Guide
Indicates that only network groups that have been applied should be
displayed.
The name of the policy network group for which you want to display
information; or a wildcard sequence of characters for displaying infor-
mation about network groups with similar names. Use an asterisk (*) to
indicate a wildcard character.
From Entries
blt 4.0.1.166
10.0.1.166
143.209.92.166
192.85.3.1
cli 143.209.92.0/255.255.255.0
172.28.5.0/255/255/255.0
June 2012 page 33-203