Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2457

QoS Policy Commands
-> show applied policy list
Group Name
list1
egress_list1
output definitions
Group Name
From
Type
Enabled
Entries
Release History
Release 6.3.4; command was introduced.
Release 6.4.3; egress policy list type supported.
Related Commands
show active policy list
show policy rule
MIB Objects
alaQoSRuleGroupsTable
alaQoSRuleDefaultList
alaQoSRuleGroupsName
alaQosRuleGroupsSource
alaQosRuleGroupsType
alaQosRuleGroupsEnabled
alaQosRuleGroupsStatus
alaQosAppliedRuleGroupsTable
alaQosAppliedRuleGroupsName
alaQosAppliedRuleGroupsSource
alaQosAppliedGroupsType
alaQosAppliedGroupsEnabled
alaQosAppliedRuleGroupsStatus
OmniSwitch CLI Reference Guide
From Type
cli unp
cli egress
The name of the policy list. Configured through the
mand. A plus sign (+) preceding a policy list name indicates that the list
was modified or created since the last qos apply.
Where the list originated.
The type of rule (unp or egress). Configured through the
command. Note that the default policy list is not shown. Use the
policy rule command to display rules that are members of the default
policy list.
Whether or not the rule is enabled. Configured through the
command.
The QoS policy rules that are grouped together in this policy list. Con-
figured through the
Displays only those policy lists that are currently being enforced on the
switch.
Displays information about pending and applied policy rules
June 2012
Enabled Entries
Yes r1
r2
No r1
r2
r3
policy list command.
policy list com-
policy list
show
policy list
page 33-237