Show Ethernet-Service Vlan - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

VLAN Stacking Commands

show ethernet-service vlan

Displays a list of SVLANs configured fro the switch.
show ethernet-services vlan [svid1-[svid2]]
Syntax Definitions
svid1
-svid2
Defaults
By default, all SVLANs are displayed if an SVLAN or range of SVLANs is not specified with this
command.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Specify a single SVLAN ID or a range of SVLAN IDs to display configuration information for a specific
SVLAN or range of SVLANs.
Examples
-> show ethernet-services vlan
vlan
+--------+------------+-------------------------+
4010 svlan
4011 ipmvlan
4020 mgmt
4021 svlan
4030 ipmvlan
-> show ethernet-service vlan 4010
Name
Traffic Type
output definitions
vlan
Traffic Type
name
Release History
Release 6.3.1; command was introduced.
OmniSwitch CLI Reference Guide
The VLAN ID number identifying the SVLAN (2–4094).
The last VLAN ID number in a range of SVLANs that you want to
specify (e.g. 10-12 specifies VLANs 10, 11, and 12).
Type
Customer ABC
Video-Service
Provider Management
Customer XYZ
HBO
: Customer ABC
: svlan
The SVLAN ID number identifying the instance.
The type of SVLAN (svlan = customer traffic, mgmt = management
traffic, or ipmvlan = IP Multicast VLAN traffic).
The user-defined text description for the SVLAN. By default, the
SVLAN ID is specified for the description.
June 2012
name
page 44-31