Aaa Tacacs+-Server - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

AAA Commands

aaa tacacs+-server

Configures or modifies a TACACS+ server for Authenticated VLANs or Authenticated Switch Access.
aaa tacacs+-server server-name [host {hostname | ip_address} {hostname2 | ip_address2}] [key
secret][timeout seconds] [port port]
no aaa tacacs+-server server-name
Syntax Definitions
server-name
hostname
ip_address
hostname2
ip_address2
secret
seconds
port
Defaults
parameter
seconds
port
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of the command to remove a TACACS+ server from the configuration. Only one
server may be deleted at a time. Note that if any Authenticated Switch Access (such as telnet) is
configured for the server, remove the switch access configuration first before attempting to remove the
server.
•
A host name (or IP address) and a secret are required when configuring a server.
•
The server and the backup server must both be TACACS+ servers.
OmniSwitch CLI Reference Guide
The name of the TACACS+ server.
The host name (DNS name) of the primary TACACS+ server. The host
name or IP address is required when creating a server.
The IP address of the primary TACACS+ server. An IP address or host
name is required when creating a server.
The host name (DNS name) of an optional backup TACACS+ server.
The IP address of an optional backup TACACS+ server.
The shared secret known to the switch and the server, but which is not
sent over the network. Can be any text or hexadecimal string but MUST
match the secret configured on the server. The secret is case-sensitive.
required when creating a server.
The timeout for server replies to authentication requests.
The port number for the primary TACACS+ server.
default
2
49
June 2012 page 36-9