Show Ethernet-Service Uni-Profile - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ethernet-service uni-profile

show ethernet-service uni-profile
Displays the profile attribute configuration for VLAN Stacking User Network Interface (UNI) profiles.
show ethernet-service uni-profile [uni-profile-name]
Syntax Definitions
uni-profile-name
Defaults
By default, all UNI profiles are displayed if a UNI profile name is not specified with this command.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Specify a UNI profile name to display attributes for a single UNI profile.
Examples
-> show ethernet-service uni-profile
Profile Name
+----------------+-------+--------+---------+----------+--------+---------+
uprofile-video1
output definitions
Profile Name
Stp
802.1x
802.3ad
802.1AB
MVRP
AMAP
Release History
Release 7.1.1; command introduced.
page 34-42
An alphanumeric string. Use quotes around the string if the profile name
contains multiple words with spaces between them (for example,
"Alcatel-Lucent Engineering").
Stp 802.1x 802.3ad
tunnel drop peer
The name of the UNI profile.
Indicates how Spanning Tree traffic control packets are processed.
Indicates how IEEE 802.1x control packets are processed.
Indicates how IEEE 802.3ad control packets are processed.
Indicates how IEEE 802.1AB control packets are processed.
Indicates how the Multiple VLAN Registration Protocol packets are
processed.
Indicates how Alcatel-Lucent Mapping Adjacency Protocol packets are
processed.
VLAN Stacking Commands
802.1AB MVRP
drop tunnel
OmniSwitch CLI Reference Guide
AMAP
drop
March 2011