Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3194

Related Commands
configure service sdp create
configure service sdp shutdown
configure service sdp signaling
configure service sdp adv-mtu-
override
configure service sdp path-mtu
show service sdp-using
show service id sdp
MIB Objects
sdpInfoTable
sdpId
sdpLdpEnabled
page 50-20
Configures an SDP, which is used to direct traffic to another router
through MPLS-based service tunnels.
Configures the administrative status of the specified SDP.
Enables or disables auto-label signaling for the specified SDP. Enable
signaling if LDP-signaled LSPs are configured for the SDP.
Enables or disables VC-type MTU override for the specified SDP.
Configures the administrative MTU value for the SDP.
Displays the SDP usage for the local router or for a far-end router IP
address.
Displays the SDP configuration for the specified service.
Virtual Private LAN Service (VPLS) Commands
OmniSwitch CLI Reference Guide June 2012