Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2707

Port Mobility Commands
•
Binding rules, MAC address rules, and protocol rules also capture DHCP client traffic. The exception
to this is binding rules that specify an IP address as part of the rule, similar to IP network address rule
definitions.
•
Rules are only assigned to existing VLANs. Use the vlan command to create a new VLAN.
Examples
-> vlan 10 dhcp mac range 00:00:39:59:0a:0c 00:00:39:59:0a:0f
-> vlan 10 no dhcp mac range 00:00:39:59:0a:0c
Release History
Release 6.1; command was introduced.
Related Commands
vlan dhcp mac
vlan dhcp port
vlan dhcp generic
show vlan
show vlan rules
OmniSwitch CLI Reference Guide
Defines a DHCP MAC address rule for an existing VLAN. Mobile ports
that receive DHCP frames with a source MAC address that matches the
address specified by this rule are temporarily assigned to the VLAN.
Defines a DHCP port rule for an existing VLAN. The mobile port spec-
ified by this rule is temporarily assigned to the VLAN when it receives
DHCP frames.
Defines a generic DHCP rule for an existing VLAN. Mobile ports that
receive DHCP frames that do not match other DHCP rules are tempo-
rarily assigned to the VLAN.
Displays existing VLANs.
Displays rules defined for VLANs.
June 2012 page 37-5