Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2486

VLAN or UNP returned by 802.1x authentication. If 802.1x authentication does not provide such infor-
mation, the device is moved based on the supplicant device classification policies.
Examples
-> 802.1x 3/1 non-supplicant allow-eap pass
-> 802.1x 4/1 non-supplicant allow-eap fail
-> 802.1x 5/1 non-supplicant allow-eap noauth
-> 802.1x 6/1 non-supplicant allow-eap none
Release History
Release 6.4.4; command was introduced.
Related Commands
802.1x
802.1x supplicant bypass
show 802.1x
show 802.1x device
classification policies
MIB Objects
alaDot1xAuthPolicyTable
alaDot1xSBAllowEAP
page 35-12
Configures 802.1x parameters for the specified port.
Configures the 802.1x bypass operation status for the 802.1x port.
Displays the 802.1x configuration for the port.
Displays device classification policies configured for an 802.1x port.
OmniSwitch CLI Reference Guide
802.1X Commands
June 2012