Show Policy Server Long - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show policy server long

Displays more detailed information about an LDAP policy server.
show policy server long
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
This command displays detailed information about policy servers. Use the show policy server command
to display basic information about policy servers.
Examples
-> show policy server long
LDAP server 0
IP address
TCP port
Enabled
Operational status
Preference
Authentication
SSL
login DN
searchbase
Last load time
LDAP server 1
IP address
TCP port
Enabled
Operational status
Preference
Authentication
SSL
login DN
searchbase
Last load time
output definitions
IP address
TCP port
page 34-8
: 155.132.44.98,
: 16652,
: Yes,
: Unkn,
: 99,
: password,
: Disabled,
: cn=Directory Manager,
: ou:4.1, cn=policyRoot, o=company.fr
: 09/13/01 16:38:18
: 155.132.48.27,,
: 21890,
: Yes,
: Unkn,
: 50,
: password,
: Disabled,
: cn=Directory Manager,
: o=company.fr
: 00/00/00 00:00:00
The IP address of the policy server.
The TCP/IP port number used by the switch to connect to the policy
server.
Policy Server Commands
OmniSwitch CLI Reference Guide June 2012