Show Policy Mac Group - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

QoS Policy Commands

show policy mac group

Displays information about pending and applied MAC groups.
show [applied] policy mac group [mac_group]
Syntax Definitions
applied
mac_group
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all policy MAC groups displays unless mac_group is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy MAC group.
- Indicates the policy MAC group is pending deletion.
# Indicates that the policy MAC group differs between
the pending/applied MAC groups.
Examples
-> show policy mac group
Group Name:
pubs1
+yuba
OmniSwitch CLI Reference Guide
Indicates that only MAC groups that have been applied should be
displayed.
The name of the MAC group for which you want to display informa-
tion; or a wildcard sequence of characters for displaying information
about MAC groups with similar names. Use an asterisk (*) to indicate a
wildcard character.
From Entries
cli 0020da:05f623
0020da:05f624
143.209.92.166
192.85.3.1
cli 080020:D16E51
172.28.5.0/255/255/255.0
June 2012 page 33-209