Configure Service Vpls Shutdown - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Virtual Private LAN Service (VPLS) Commands

configure service vpls shutdown

Configures the administrative status of the specified VPLS.
configure service vpls service-id [customer customer-id] {no shutdown | shutdown}
Syntax Definitions
service-id
customer-id
no shutdown
shutdown
Defaults
By default, the administrative status for the service is disabled.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Disable the administrative status of the VPLS and any associated SAPs and SDPs before attempting to
remove a VPLS.
•
Disabling the VPLS administrative status does not remove the VPLS configuration from the router.
•
Specifying the customer ID associated with this VPLS is not required when using this command.
However, if the customer ID specified is not the one associated with the VPLS, the command is not
allowed.
Examples
-> configure service vpls 10 no shutdown
-> configure service vpls 20 customer 20 no shutdown
-> configure service vpls 20 shutdown
Release History
Release 6.4.2; command was introduced.
OmniSwitch CLI Reference Guide
An existing VPLS ID number.
Optional. The customer ID number associated with the specified service
ID number.
Administratively enables the service.
Administratively disables the service.
June 2012 page 50-33